Diy Wooden Blanket Ladder

Cut 1 dowels ladder rungs to 18 or desired length.

Diy wooden blanket ladder. My ladder is 6 feet tall 18 inches wide and about 12 inches between the rungs. Make the lumber cuts for the diy blanket ladder from your 2 3 lumber cut two pieces at 76 inches long each. I chose to cut the bottoms of each piece at a 10 degree angle so the blanket ladder would sit and lean better on the ground. A custom wooden blanket ladder is the perfect way to accessorize a wall and keep your blankets organized and on display.

You need to do this so it will be flush and level when you lean your blanket ladder against the wall when it s finished. Next you ll want to angle the bottom of the 6 foot sections to 10. Sand all the parts with 100 grit and then 220 grit sandpaper. Cut two 6 foot pieces for the sides of your ladder and five 18 inch pieces for the rungs.

A taller one cut i x 3 boards ladder rails at a 15 degrees angle at each end for a finished length of 60 inches. This cozy corner is the perfect spot for this diy blanket ladder. Get cozy with this diy from diy network. The shorter height keeps it in proportion to the rest of the furniture and the grey stain fits in with the color scheme beautifully.

Diy blanket ladder dimensions are 60 by 19 however it can be any size you would like. Display your new diy blanket ladder. Measure your ladder and mark where your rungs need to go. Now the hunt is on for more blankets and the perfect basket to keep underneath for throw pillows.